CBD15-JH All Parts

Genuine STAXX Part #32302125 Neutral spring The neutral spring is used to enable the 3 positions of the trigger, when broken the trigger resorts to...

Genuine STAXX Part# 20501016 Wheel bearing Fits a huge range of applications, for most electric and manual pallet trucks. Fits the following mode...

Genuine Hangcha Part #02.01.9334 Hangcha JL3 Solenoid Valve Located behind the green protection guard the solenoid valve is seated into the hydraul...

Genuine Hangcha Part# 02.SB.PJ.0016 Mode Switch Card The mode switch card is used to secure the micro switch in place so that a press of the mode b...

Genuine Hangcha Part# 02.SB.PJ.0015 Mode button The Mode button self secures within the control pod housing with integral clips, behind the mode bu...

Genuine Hangcha Part# 02.SB.PJ.0007 Micro Switch This micro switch is fitted from the inside of the control pod on these models, the micro switch i...

Genuine Hangcha part #02.SB.PJ.0031 Hangcha JH Lower control cover The lower control cover is situated at the top of the handle, the cover comes in...

Genuine Hangcha Part# 02.SB.PJ.0006 Button Switch Card This switch card is used to secure the micro switch in place so that a press of the lift, lo...

Genuine Hangcha Part# 02.SB.PJ.0005 Lift button The Lift button self secures within the control pod housing with integral clips, behind the mode bu...

Genuine Hangcha Part #20101040002 Hangcha JH Key Switch The JH key switch is used to power on the pallet truck and is located on the key cover whic...

Genuine Hangcha Part #02.SB.PJ.0017 Hangcha JH Key Control Cover The JH key cover mounts directly on to the lower control pod cover, it is secured ...

Genuine Hangcha part #02.SB.PJ.0004 Hangcha JH Horn Button located on the upper control pod cover the horn button when pressed beeps to alarm anyth...

Genuine Hangcha Part # 02.SB.PJ.0003  Emergency stop button The emergency stop button, also known as an E-Stop is a safety feature on the models it...

Genuine Hangcha Part# 02.SB.PJ.0008 Micro Switch This micro switch is fitted from the inside of the control pod on these models, the micro switch i...

Genuine Hangcha Part # 02.SB.PJ.0003 CBD15-JH Emergency reverse button The emergency reverse button (also known as EMR button) requires the 2 butto...

Genuine Hangcha Part# 02.SB.PJ.0010 Button return spring On models with electric lowering, the truck has 2 of these springs behind each button incl...

Genuine Hangcha Part #02.SB.PJ.0027 Throttle / Accelerator The bare throttle assembly as pictured is mounted within the control pod, fitted to each...

Genuine Hangcha Part #02.SB.PJ.0027 throttle control lever The throttle control lever enables the user to operate the throttle. Held in place by a ...

Genuine Hangcha Part #3.0451 Pushrod bush The pushrod bush is fitted to the fork end of the pushrod, when worn the wheel fork and pushrod can have ...

Genuine Hangcha Part #40.11.038 Pushrod Axle (Wheel Fork) This pushrod axle, mounts the wheel fork to the pushrod and is held in place by a 5mm rol...

Genuine Hangcha Part #40.14.052 Pushrod axle (Rocker arm) This pushrod axle, mounts the pushrod adjuster to the rocker arm and is held in place b...

Genuine Hangcha Part #40.14.048 Pushrod adjuster The pushrod adjuster screws on to the end of the pushrod and is secured in place with a large nut....

Genuine Hangcha Part #3.0482 Oil bolt seal The seal is used to ensure no oil leaks from the bolts used for the oil inlet pipe and oil pipe, each bo...

Genuine Hangcha Part #3.0482 Oil bolt (Short) This oil bolt is the shorter of the 2 fitted to the Hangcha electric pallet trucks, used to secure ...