Hangcha CBD15-JL3 Parts

Genuine STAXX Part #32302125 Neutral spring The neutral spring is used to enable the 3 positions of the trigger, when broken the trigger resorts to...

Genuine STAXX Part# 20501016 Wheel bearing Fits a huge range of applications, for most electric and manual pallet trucks. Fits the following mode...

Genuine Hangcha Part #02.01.9334 Hangcha JL3 Solenoid Valve Located behind the green protection guard the solenoid valve is seated into the hydraul...

Genuine Hangcha Part #02.01.9367 Hangcha JL3 Lowering Coil  When energised the staxx coil will signal the solenoid valve and allow the truck to low...

Genuine Hangcha Part #3.1062 Hangcha JL3 Oil Reservoir Seal This seal sits in a recess within the oil seal and the hydraulic pump assembly, The sea...

Genuine Hangcha Part #16.0246 Hangcha JL3 Momentary Button JL3 momentary button is used for the lift, lower and horn functions, the buttons are loc...

Genuine Hangcha Part #02.SB.PJ.0027 throttle control lever The throttle control lever enables the user to operate the throttle. Held in place by a ...

Genuine Hangcha Part #3.0451 Pushrod bush The pushrod bush is fitted to the fork end of the pushrod, when worn the wheel fork and pushrod can have ...

Genuine Hangcha Part #40.11.038 Pushrod Axle (Wheel Fork) This pushrod axle, mounts the wheel fork to the pushrod and is held in place by a 5mm rol...

Genuine Hangcha Part #40.14.052 Pushrod axle (Rocker arm) This pushrod axle, mounts the pushrod adjuster to the rocker arm and is held in place b...

Genuine Hangcha Part #40.14.048 Pushrod adjuster The pushrod adjuster screws on to the end of the pushrod and is secured in place with a large nut....

Genuine Hangcha Part #3.0482 Oil bolt seal The seal is used to ensure no oil leaks from the bolts used for the oil inlet pipe and oil pipe, each bo...

Genuine Hangcha Part #3.0482 Oil bolt (Short) This oil bolt is the shorter of the 2 fitted to the Hangcha electric pallet trucks, used to secure ...

Genuine Hangcha Part #30.01.1290 Load Wheel Plate Fits a variety of models including the CBD15-JL3 and CBD15-JH plus many more.... Part #15 on the ...

Genuine Hangcha Part# 40.11.039 Load Wheel Axle Fits the following Hangcha Models : CBD15-JH, CBD15-JL3, Also fits other models from: EP, F3, F4, E...

Genuine Hangcha Part #40.11.036 Fork Axle This product fits a vast range of Hangcha electric pallet trucks, models include: CBD15-JL3, CBD15-JH  pl...

Genuine STAXX PU load wheel for Electric Pallet Trucks. - 80mm diameter - 70mm width - 20mm bore Fits all STAXX electric pallet trucks (excluding l...

Genuine Hangcha Part #03.90.091 Hangcha Radial Thrust Bearing The radial thrust bearing is sits on top of the gearbox housing, the thrust plate is ...

Genuine Hangcha Part #02.01.9274 Hangcha Proximity Sensor Located at the bottom of the handle the proximity sensor is a vital part that allows the ...

Genuine Hangcha Part #02.YYL.3868 Hangcha Oil Pipe The CBD oil pipe connects the lift motor to the hydraulic unit, the oil pipe allows oil to pass ...

Genuine Hangcha Part# 02.YYL.2331 Oil pipe for the CBD15-JH and CBD15-JL3 electric pallet truck models. Fits models with electric lift and manual l...

Genuine Hangcha Part #02.YYL.2383 Hangcha Oil Bolt The oil bolt secures the oil pipe to the hydraulic unit, the bolt has multiple holes in it to al...

Genuine Hangcha Part #02.01.0284 Junction Box Located on the motor, the junction box is used to connect the controller wires to the motor wires, th...

Genuine Hangcha Part #02.01.2207 Lift pump contactor The CBD lift pump contractor is located behind the green plastic guard and attached the the li...